garmin archivos - Bike Check Studio

SILCA CHISELA COMPUTER MOUNT Ti 3D

bcs_admin — Mon, 30 Oct 2023 18:48:49 +0000

**Chisela is printed to order and may require 3 days for production time before shipping**

At the end of 2021, the EF Pro Cycling Team asked us to create the ultimate aerodynamic computer mount to fit the Wahoo computer to their FSA 5D and 6D handlebars.

Leveraging cutting edge aerodynamic development, 3D printing, and state of the art ceramic coatings, the Chisela computer mount was born. The Chisela is aerodynamically optimized for the cleanest possible airflow under both the Wahoo and Garmin computers and features a unique ‘T-Tray’ mounting system inspired by the T shaped underfloor of an F1 car. This T-Tray mounting system allows for quick-release style attachment of lights or cameras underneath the mount, just slide and click to mount and then pull on the lever and slide off to dismount.

Best of all, the T-Tray system adds virtually no additional weight and has no aerodynamic penalty, while also locating the light or camera aft of the computer for improved weight distribution, aerodynamics, and appearance.

Chisela comes in 7 fitment options. The Standard and Wide fitments work with traditional 4-bolt stems, while the other fitments listed are 3D printed specifically to your stem or frame as listed.

V1 Wahoo computers are not supported with this mount. Only the updated design will fit on the mount.

• Weight: 27-32g
• 3-6w Aero savings
• Removable light mount included
• Black Cerakote Finish
• Garmin and Wahoo (new models only) pucks included
• 150g compatible for cpu, 250g for accessory
• 6 – 12x stronger than aluminum
• Includes 2 6Al/4V Ti M5 bolts (2g ea.)
• Made in USA

SILCA SHIELD WARRANTY

We understand bad luck and unfortunate circumstances, and would like to help you out. SILCA-Shield is our exclusive warranty coverage for Ultimate Level products and is THE most comprehensive warranty in all of cycling.

25 Year Hard Parts Guarantee – You break any hard part, we’ll replace or repair it. This is not a typical ‘manufacturers defect’ but any failure of any hard part in regular use. For 25 years, 1 Year No Fault – No questions asked repair or replacement to correct functional damage regardless of cause. Extend this to 2 Years No Fault – No questions asked by registering your product within 60 days of purchase here.

SILCA Limited 2 year coverage for all rubber, leather and gauge parts.

SILCA Shield Registration

All SILCA Warranties

El cargo SILCA CHISELA COMPUTER MOUNT Ti 3D apareció primero en Bike Check Studio.

BAR FLY 4 TT TRI AERO BAR MOUNT COMPUTER

bcs_admin — Mon, 30 Oct 2023 18:37:49 +0000

Included in Box:

BF4 TT composite mount with hardware
7 Computer heads:
Garmin, Polar, Wahoo, Mio, Joule, Cateye, Bryton
GoPro/Finned mount
Light mount
Shim for 22.2mm handlebars

Compatible Computers:

Garmin Edge Series 200, 500, 510, 520, 800, 810, 820, 1000, 1030, Touring
Watches 910XT, 920XT
Polar M450, M460, V650
Wahoo ELEMNT and BOLT
Mio 500, 505, 505HC
Cyclo 200, 205HC, 210, 315HC, 400, 405, 405HC, 505HC, 605HC
Magellan 315, 505
Powertap Joule
Cateye Wireless models Padrone, Strada, Micro, Velo
Bryton 100, 300, 310, 330, 530, 10, One, 410
Lezyne Micro, Micro C, Mini, Macro, Super and SuperSE (Lezyne computer head is not included with BF4 mounts but is available for purchase)

El cargo BAR FLY 4 TT TRI AERO BAR MOUNT COMPUTER apareció primero en Bike Check Studio.

BAR FLY 4 MTB GRAVEL CX MOUNT COMPUTER

bcs_admin — Mon, 30 Oct 2023 18:37:49 +0000

BF4 MTB mounts on right side of the stem and faces back over the stem. #BF4MTB-182

Modular system mounts a computer or GoPro base on top only. Compatible with 31.8mm and 35.0mm handlebars.

Included in Box:

BF4 MTB mount with hardware
7 Computer heads:
Garmin, Polar, Wahoo, Mio, Joule, Cateye, Bryton
GoPro base
Light mount
Shim for 31.8 handlebars

Computer compatibility:

Garmin Edge Series 200, 500, 510, 520, 800, 810, 820, 1000, 1030, Touring
Watches 910XT, 920XT
Polar M450, M460, V650
Wahoo ELEMNT and BOLT
Mio 500, 505, 505HC
Cyclo 200, 205HC, 210, 315HC, 400, 405, 405HC, 505HC, 605HC
Magellan 315, 505
Powertap Joule
Cateye Wireless models Padrone, Strada, Micro, Velo
Bryton 100, 300, 310, 330, 530, 10, One, 410
Lezyne Micro, Mirco C, Mini, Macro, Super and SuperSE (Lezyne computer head is not included with BF4 mounts but is available for purchase)

El cargo BAR FLY 4 MTB GRAVEL CX MOUNT COMPUTER apareció primero en Bike Check Studio.

BAR FLY 4 STEM CAP MOUNT COMPUTER

bcs_admin — Mon, 30 Oct 2023 18:37:49 +0000

May not work with large computers and hi-rise stems, check clearance before ordering. The center of your computer will sit in the center of the stem cap.

Included in the set:

BF4 aluminum stem cap with stem bolt and hardware
BF4 4mm Spacer, to raise mount if needed
7 Computer heads:
Garmin, Polar, Wahoo, Mio, Joule, Cateye, Bryton
GoPro base

Light mount is not included with Stem Cap Mount

Compatible Computers:

Garmin Edge Series 200, 500, 510, 520, 800, 810, 820, 1000, 1030, Touring
Watches 910XT, 920XT
Polar M450, M460, V650
Wahoo ELEMNT and BOLT
Mio 500, 505, 505HC
Cyclo 200, 205HC, 210, 315HC, 400, 405, 405HC, 505HC, 605HC
Magellan 315, 505
Powertap Joule
Cateye Wireless models Padrone, Strada, Micro, Velo
Bryton 100, 300, 310, 330, 530, 10, One, 410
Lezyne Micro, Micro C, Mini, Macro, Super and SuperSE (Lezyne computer head is not included with BF4 mounts but is available for purchase)

El cargo BAR FLY 4 STEM CAP MOUNT COMPUTER apareció primero en Bike Check Studio.

BAR FLY RACE SPOON CENTER BAR STEM MOUNT

bcs_admin — Mon, 30 Oct 2023 18:37:49 +0000

BAR FLY RACE SPOON

The Race Spoon mounts on select Integrated Bar/Stems with in-line mounting holes. CNC machined from aluminum, the Race Spoon is thinner and lighter than our previous Spoon. It comes with 6 computer heads. Mounting of the Spoon requires your bar/stem to have mount holes less than 4.5cm apart. #BFRSPB-539

Included in Box:

BF Race Spoon with head mounting hardware
6 Computer heads:
Garmin, Wahoo, Bryton, Cateye, Mio, Polar

NOT Included in Box:

Handlebar mounting bolts (size and thread is determined by handlebar manufacturer and should be included with bar)

Light / Camera compatibility:

Optional Race GoPro base is available to fit Race Spoon
Confirm weight capacity of threaded handlebar mounts with manufacturer

Compatible Computers:

Garmin Edge Series 200, 500, 510, 520, 800, 810, 820, 1000, 1030, Touring
Watches 910XT, 920XT
Polar M450, M460, V650
Wahoo ELEMNT and BOLT
Mio 500, 505, 505HC
Cyclo 200, 205HC, 210, 315HC, 400, 405, 405HC, 505HC, 605HC
Magellan 315, 505
Cateye Wireless models Padrone, Strada, Micro, Velo
Bryton 100, 300, 310, 330, 530, 10, One, 410
Lezyne Micro, Mirco C, Mini, Macro, Super and SuperSE (Lezyne computer head is not included with mount but is available for purchase)

El cargo BAR FLY RACE SPOON CENTER BAR STEM MOUNT apareció primero en Bike Check Studio.

BAR FLY 4 MINI FRONT MOUNT COMPUTER

bcs_admin — Mon, 30 Oct 2023 18:37:48 +0000

The Bar Fly 4 Mini is an “out-front” mount made specifically for smaller cycling computers. Modular system mounts your computer, Di2/EPS juncion box, and a GoPro or light. Compatible with 31.8mm and 35.0mm handlebars. #BF4MNB-199

Included in Box:

BF4 Mini injection molded specialty Nylon mount with hardware
7 Computer heads:
Garmin, Polar, Wahoo, Mio, Joule, Cateye, Bryton
GoPro base
Light mount
Shim for 31.8 handlebars
Di2/EPS mount

Compatible Computers:

Garmin Edge Series 200, 500, 510, 520
Watches 910XT, 920XT
Polar M450, M460
Bryton 100, 300, 310, 330, 530, 10 and One
Cateye
Lezyne Micro, Mirco C, Mini and Macro
(Lezyne computer head is not included with BF4 mounts but is available for purchase)

El cargo BAR FLY 4 MINI FRONT MOUNT COMPUTER apareció primero en Bike Check Studio.

BAR FLY 4 MAX FRONT MOUNT COMPUTER

bcs_admin — Mon, 30 Oct 2023 18:37:48 +0000

The Bar Fly 4 MAX is an “out-front” mount made specifically for larger cycling computers. Modular system mounts your computer, Di2/EPS junction box, and a GoPro or Light mount. Compatible with 31.8mm and 35.0mm handlebars. #BF4MXB-205

Included in Box:

BF4 MAX injection molded specialty Nylon mount with hardware
7 Computer heads:
Garmin, Polar, Wahoo, Mio, Joule, Cateye, Bryton
GoPro base
Light mount
Shim for 31.8 handlebars
Di2/EPS mount

Compatible Computers:

Garmin Edge Series 200, 500, 510, 520, 800, 810, 820, 1000, 1030, Touring
Watches 910XT, 920XT
Polar M450, M460, V650
Wahoo ELEMNT and BOLT
Mio 500, 505, 505HC
Cyclo 200, 205HC, 210, 315HC, 400, 405, 405HC, 505HC, 605HC
Magellan 315, 505
Powertap Joule
Cateye Wireless models Padrone, Strada, Micro, Velo
Bryton 100, 300, 310, 330, 530, 10, One, 410
Lezyne Micro, Mirco C, Mini, Macro, Super and SuperSE (Lezyne computer head is not included with BF4 mounts but is available for purchase)

El cargo BAR FLY 4 MAX FRONT MOUNT COMPUTER apareció primero en Bike Check Studio.

ROTOR GARMIN – GoPRO&LIGHT MOUNT

bcs_admin — Mon, 30 Oct 2023 18:36:22 +0000

Product Description

CHARACTERISTICS

COLOR	TECHNOLOGIES	DISCIPLINE
Black	No	MTB, Road

El cargo ROTOR GARMIN – GoPRO&LIGHT MOUNT apareció primero en Bike Check Studio.

4ZA FRONT MOUNT FOR INTEGRATE ROAD HANDLEBAR

bcs_admin — Mon, 30 Oct 2023 18:31:22 +0000

This Forza Aero Outfront is made for the Ridley Noah Fast Integrated handlebars. The Outfront Mount is attached to the handlebar by 2 bolts below the handlebar and stem.
Compatible with Mio, Garmin and Wahoo. Outfront can be placed more to the front or the back so it will always perfectly fit from a Garmin Edge 820 to a Garmin Edge 1030.

Want to mount a Camera or light under you computer?

This can be done with the addition of the FORZA Light / Camera Mount part # HBPAER4ZA005

Included:

Mount
Fixing Bolts
Wahoo puck
Garmin puck

2 year warranty against manufacturing defaults.

El cargo 4ZA FRONT MOUNT FOR INTEGRATE ROAD HANDLEBAR apareció primero en Bike Check Studio.

SILCA MENSULA COMPUTER MOUNT Ti 3D

bcs_admin — Mon, 30 Oct 2023 18:29:35 +0000

• Weight: 27-36g
• 3-6w Aero savings
• Garmin and Wahoo mount compatible
• 6 – 12x stronger than aluminum
• Includes 2 6Al/4V Ti M5 bolts (2g ea.)
• Made in USA
• Individual Bolt Spacing

Download: MENSOLA Measurement Guide
Learn More: Click Here

The vision for MENSOLA started with a question … “What if we could remove traditional manufacturing constraints from the design of a computer mount?” Does anybody really want an extra clamp on their handlebar? Clearly NO, but traditional manufacturing constraints have made it impractical to make all of the sizes necessary to sell a mount that will work with all of the various stem face-plate geometries.

The solution here comes to us in the form of 3D printing, which gives us the ability to manufacture practically any geometry without limitations of tooling or raw material stock sizes. With what is essentially unlimited design opportunity, the engineers then set their sights on making the strongest, most beautiful, and functional mount ever seen. Borrowing structural design elements from architectural and aerospace engineering, the team at SILCA was able to use a stressed-skin design with internal truss elements. The result is a mount that is 10-15% lighter than aluminum mounts manufactured by CNC techniques, while also being 6-12 times stronger than those same aluminum designs. The stressed skin also allows for aerodynamic design elements to be used resulting in a reduced drag coefficient compared to previous designs.

Each MENSOLA is printed in 6Al/4V titanium in our Indianapolis facility and matched with the highest aerospace grade 6Al/4V Titanium hardware for mounting to your stem. Weights range from 27gm to 36gm depending on the bolt spacing of your stem or hardpoints of your integrated handlebar. Please consult our fitment guide to determine fitment for your bicycle.

SILCA SHIELD WARRANTY

SILCA Limited 2 year coverage for all rubber, leather and gauge parts.

SILCA Shield Registration

All SILCA Warranties

El cargo SILCA MENSULA COMPUTER MOUNT Ti 3D apareció primero en Bike Check Studio.