Service archivos - Bike Check Studio

SILCA GRAPHENE DETAIL KIT

bcs_admin — Fri, 20 Mar 2026 21:43:01 +0000

When you add a graphene wax coating to your bike, having the right tools is key.¬† Our suede applicator block is the perfect way to apply the graphene wax to your frame.¬† The kit comes with two microfiber towels to buff the excess away.

• 1 Suede Applicator Block
• 2 microfiber towels

SILCA LIMITED WARRANTY

Parts covered by SILCA Limited Warranty are considered to be subject to wear through normal use or are consumable subject to degradation through the course of their daily use. SILCA guarantees them free from manufacturer defects for 2 years.

El cargo SILCA GRAPHENE DETAIL KIT apareció primero en Bike Check Studio.

SILCA GRAVELERO BRACKET MOUNT

bcs_admin — Fri, 13 Mar 2026 21:26:50 +0000

The Gravelero bracket is a great way to carry your SILCA Gravelero mini-pump. This bracket is designed to hold the Gravelero in a secure and discreet location under the bottle cage using the supplied longer water bottle screws. Not compatible with the Tattico.

• Strong injection molded bracket
• Silicone retaining strap
• Two M5 screws
• Compatible with Gravelero
• Not compatible with Pocket Impero or Tattico

SILCA LIMITED WARRANTY

El cargo SILCA GRAVELERO BRACKET MOUNT apareció primero en Bike Check Studio.

SILCA TATTICO BRACKET MOUNT

bcs_admin — Fri, 13 Mar 2026 21:19:46 +0000

The TATTICO bracket is a great way to carry your SILCA TATTICO and TATTICO Bluetooth mini-pump. This bracket is designed to hold the TATTICO and TATTICO Bluetooth pumps in a secure and discreet location under the bottle cage using the supplied longer water bottle screws. Not compatible with the Gravelero.

• Strong injection molded bracket
• Silicone retaining strap
• Two M5 screws
• Compatible with Tattico and Tattico
Bluetooth®
• Not compatible with Pocket Impero

SILCA LIMITED WARRANTY

El cargo SILCA TATTICO BRACKET MOUNT apareció primero en Bike Check Studio.

SILCA ULTIMATE SHOCK PUMP

bcs_admin — Fri, 13 Mar 2026 00:45:18 +0000

The SILCA Shock Pump is a high-pressure suspension tool engineered for riders and mechanics who demand pinpoint accuracy and long-term reliability. Designed for precise inflation of both forks and rear shocks, this pump delivers the confidence you need to dial in your suspension—whether you’re tuning for a World Cup XC race, prepping for a multi-day gravel ride, or adjusting rebound before an enduro descent.

With near-digital analog accuracy, a zero-loss pump head, and fully rebuildable CNC-machined construction, this is the high-pressure shock pump you can trust—on race day, trail day, or any day in between.

• Fully CNC-machined aluminum construction (no cast or plastic components)
• Rotating gauge head for optimal visibility at any angle
• 2″ analog gauge with ±2% accuracy and 5 PSI increments
• Zero-loss air chuck with stainless/aluminum internals
• 10,000 PSI-rated stainless overbraided Kevlar hose
• Bleed valve for precise pressure tuning
• Replaceable gauge
• Full metal check valve for long-term durability
• Weight: 258g

SILCA LIFETIME WARRANTY

The SILCA Lifetime Warranty covers products from manufacturing defects for the lifetime of the user. It further covers the function of all hard parts for 7 years from the date of purchase. Expected wear and tear is not covered. Learn more about warranties.

El cargo SILCA ULTIMATE SHOCK PUMP apareció primero en Bike Check Studio.

SILCA ELETTRICO ULTIMATE INFLATOR

bcs_admin — Fri, 13 Mar 2026 00:34:06 +0000

Since 1917, SILCA has led the way in precision inflation, from the world’s first gauge-equipped pump to the legendary SuperPista and Pista floor pumps. Now, with over a century of expertise, SILCA is revolutionizing inflation again with the ELETTRICO series

—the first truly premium rechargeable electric mini inflators. SILCA ELETTRICO MICRO & ULTIMATE provide CO2-level inflation performance in a USB-C rechargeable, air-travelsafe package. No more wasted cartridges. No more pressure inconsistency. Just on-demand, precise inflation for every ride.

WHY SILCA ELETTRICO?

While the Elettrico ULTIMATE is ideal for destination gravel events or even as a floor pump replacement in your garage. Dialing in your tire pressure before a race or ride has never been easier with the 3-100 psi settable, auto cut off gauge. We have even used it to set up tires tubeless (will depend on tire and rim combo).

CO2 Performance Without the Waste – Eliminate disposable cartridges. Auto Shutoff for Hookless Rims – Protects modern tubeless setups. Air-Travel Safe – TSA-compliant for travel and destination rides and races. USB-C Rechargeable – Fast-charging for reliable inflation. Universal Chuck Compatibility – Works with SILCA Schradero & Hiro Chucks. Built for shops, pro mechanics, and serious riders, ELETTRICO is the next generation of inflation from the company that defined it.

• Ultimate has a range of 3-100psi settable digital gauge
• Accurate to 1% when used with the hose
• Ultimate is the equivalent to 9 CO2 cartridges
• Carry-on Travel Safe
• 25-60 minute charge time
• 222g
• 81 x 60 x 32 mm (Ultimate)

SILCA LIMITED WARRANTY

El cargo SILCA ELETTRICO ULTIMATE INFLATOR apareció primero en Bike Check Studio.

SILCA ELETTRICO MICRO INFLATOR

bcs_admin — Fri, 13 Mar 2026 00:28:01 +0000

WHY SILCA ELETTRICO?

The days of CO2 cartridges are officially over. The SILCA Elettrico MICRO packs the power of 4+ CO2 cartridges in a package about the size of an AirPods case. With auto-cutoff at 72 psi (no gauge), it’s safe for use with hookless rims. A single 25-minute charge provides enough power to last for months, ensuring it always has your back. The Elettrico Micro is our on-bike inflation solution.

• Micro has an auto shutoff at 72psi for hookless safety (NO GAUGE)
• Micro is equivalent to 4 CO2 cartridges
• Carry-on Travel Safe
• 25-60 minute charge time
• 111g
• 65 x 46.5 x 28 mm (Micro)

SILCA LIMITED WARRANTY

El cargo SILCA ELETTRICO MICRO INFLATOR apareció primero en Bike Check Studio.

SILCA TPU TUBES

bcs_admin — Thu, 12 Mar 2026 23:26:29 +0000

TPU tubes have long been a favorite of ours to keep for spares in your saddle bag because of how little space they take up in the bag. This allows you to carry two tubes when only one would previously have fit. The issue has long been that the plastic valves were susceptible to detaching from the tube itself, the valve cores were often pressed into plastic causing leaking issues, and the sleeve joint where the tube was joined would often fail.

Having a spare tube doesn’t do you much good if when you go to use it, it falls apart. SILCA set out to change that. Our TPU tubes have a patented technology to mechanically attach the valve to the tube itself and a welded joint to stop failures in their tracks. We have also used a threaded aluminum valve to help the tube resist heat from electric pumps and included a valve nut for the ultimate in a rattle-free and secure design.

TPU materials have made big strides over the last few years and have all but matched the rolling resistance efficiencies of Latex tubes or a Tubeless set up at a fraction of the weight of latex. Our tubes range from 45-62g keeping weight at an all time low while reducing rolling resistance and their tiny size for packing efficiency.

• 24-43mm (50mm valve) 38mm x 77mm x 24mm folded. 45g
• 24-43mm (70mm valve) 39mm x 95mm x 21mm folded. 46g
• 44-64mm (50mm valve) 58mm x 77mm x 26mm folded. 62g
• Threaded aluminum valve
• Removable Valve Core
• Rim and Disc Brake Compatible
• Patch and alcohol wipe included
• Low rolling resistance
• Less than half the size and weight of a butyl tube
• Patented valve and tube attachment

SILCA LIMITED WARRANTY

El cargo SILCA TPU TUBES apareció primero en Bike Check Studio.

SILCA TUBELESS REPLENISHER INJECTOR

bcs_admin — Thu, 12 Mar 2026 23:16:54 +0000

Make injecting sealant through your valves easy and clean with the SILCA Tubeless Replenisher Injector.

For use with Ultimate Tubeless Replenisher. Not compatible with Ultimate Tubeless Sealant w/FIBERFOAM. Comes with an injector and valve core tool.

• 2oz capacity
• Compatible with Ultimate Tubeless Replenisher
• Not compatible with Ultimate Tubeless Sealant w/Fiberfoam

SILCA LIMITED WARRANTY

El cargo SILCA TUBELESS REPLENISHER INJECTOR apareció primero en Bike Check Studio.

SILCA ULTIMATE SEALANT REMOVER

bcs_admin — Thu, 12 Mar 2026 23:08:01 +0000

WATER-BASED ‚ BIODEGRADABLE

This patented formula breaks down the molecular bond between the latex and the surface to which it has attached. Safe for frame paint when used as directed.

Intended to remove dried latex from all surfaces and your clothing. See directions for use.

Directions:

Hard Surfaces

1. Test first in an inconspicuous are for surface integrity

2. Wet area before applying.

3. Spray area liberally.

4. Wipe off immediately with a clean, white cloth.

5. Completely wash bicycle to remove any excess Ultimate Sealant Remover. Do not allow the treatment to remain on the bicycle for a prolonged period of time. Repeat, if necessary.

Clothing / Fabric Surface

1. Test first in an inconspicuous are for surface integrity

2. Spray area liberally and wait 3 minutes.

3. Gently agitate with a stiff brush (tooth brush works great). Repeat, if necessary.

• Water based
• Bio Degradable
• Removes Dried Latex
• Breaks down molecular bond of latex and a surface

SILCA LIMITED WARRANTY

El cargo SILCA ULTIMATE SEALANT REMOVER apareció primero en Bike Check Studio.

SILCA REPLACEMENT PRESTA VALVE CORE (SET OF 6)

bcs_admin — Thu, 12 Mar 2026 00:46:11 +0000

So we’ve always noticed how really expensive tubulars had such nice valve cores with smooth edges and high quality seals that resisted sticking. When we started developing SILCA Tubeless valve stems, we set out to find the best cores, and realized that only a handful of companies make them globally. After a lot of phone calls, emails and discussions, we knew instantly when we had found the ones we were after. Fully CNC machined with roll-formed threads these cores give themselves away with their spun-formed tops that keep the valve nut from unthreading too far. Most companies crimp the threads here which damages them such that the nut cannot thread over..we find the extra effort to spin form a perfect little mushroom head on the top of the valve to really say it all: these are carefully made. Icing on the cake is the use of fully synthetic seals for both the stem seal and the core seal, this means that the core will resist aging and cracking for far longer while being significantly more resistant to both synthetic and natural based sealants if you are using tubeless. Best of all, this additional thought, care and attention to detail costs almost nothing over lesser cores while saving you pain and suffering over the coming years.

• CNC Machined brass valve cores
• Full synthetic seals resist aging and
are more resistant to damage from
sealant
• 6 valve cores and 1 removal tool

SILCA LIMITED WARRANTY

El cargo SILCA REPLACEMENT PRESTA VALVE CORE (SET OF 6) apareció primero en Bike Check Studio.